From roll to wall - here`s how to do it beautifully.
A simple guide to make every roll a joy to install
General Preparation for All Wallpaper Types
Ensure walls are clean, dry, smooth, and stable.
Remove dust, grease, old wallpaper, or flaky paint.
Fill and sand any cracks or holes.
Apply a suitable primer or treatment depending on your wall type.
✦ Standard Wallpaper (Paste the Wall)
Use wallpaper paste directly on your wall, applying enough paste for one wallpaper strip at a time.
Smooth onto the wall with a damp sponge, avoiding pushing adhesive out the edges.
Allow wallpaper to settle for 15 minutes before trimming edges.
Use a soft roller to seal the joins gently.
Clean excess paste immediately.
✦ Premium Wallpaper (Spray the Wall)
Wall must be painted or primed prior to installation.
Lightly spray your wall using tap water (approx. 100ml per sqm).
Apply wallpaper onto the damp wall and reposition if needed within 10 minutes.
Align edges carefully, gently rolling seams with a soft rubber roller.
Remove adhesive residue with a damp sponge.
✦ Self-Adhesive Wallpaper (Peel-and-Stick)
Walls must be clean, dry, and smooth.
Peel 10–15 cm of backing and position wallpaper at the top of your wall.
Gradually peel backing while smoothing downward, avoiding bubbles.
Use a felt-edged squeegee at a 45-degree angle to remove bubbles.
Can be repositioned carefully. Remove gently if needed.
Important Notice
We’re not responsible for any damage caused during installation due to inadequate preparation or improper installation methods. Always test a small piece of wallpaper first, and consider professional installation if you are unsure or inexperienced.
Happy decorating!
Here’s a step-by-step guide tailored to the three wallpaper types we offer — so you can pick what fits your space and install it with ease.
